Een rijke interface versterkt zorgt voor het beheren van alle details van een show via een netwerk. Van een planning vooraf tot live performance monitoring.

Kenmerken

Kenmerken

  • Apparaatbeheer
    • Gebruikers kunnen parameters opslaan naar een preset-bestand en ze vervolgens snel kopiëren naar één of meer andere apparaten.
  • Frequentiecoördinatie
    • Flexibeler scanpiekbeheer en -klassificatie met uitgebreide apparatuurprofielen.
    • Te negeren intermod-tussenruimten voor groepen frequenties tijdens de frequentiecoördinatie.
    • Ad-hoc instelbare coördinatievolgordes via Coordination Workspace.
  • Live-monitoring
    • Timeline is een nieuwe logfunctie die belangrijke kanaalstatusinformatie continu registreert, zoals het RF-signaalniveau, het audiosignaalniveau, storingsdetectie, ShowLink® Signal Strength en nog veel meer. Deze functie slaat gegevens over een langere tijd op in een efficiënt opslagformaat, zodat gebruikers nauwkeurig de prestaties van hun draadloze systeem kunnen vastleggen en evalueren.
  • Bedrijfsnetwerken
    • Remote Device Connection stelt gebruikers in staat om Wireless Workbench te verbinden met apparatuur via subnetwerken.
    • Access Control beveiligt apparatuur tegen ongeoorloofde wijzigingen via Shure-software.

Description

Verbeterde Grafische User Interface 

Een rijke interface versterkt zorgt voor het beheren van alle details van een show via een netwerk. Van een planning vooraf tot live performance monitoring.

Geavanceerde RF Spectrum Plotten

Voor een show kunnen opgeslagen scanbestanden worden gebruikt om informatie over de RF-omgeving te bieden van de off-site. Ook bevat dit een databank van tv-kanalen op basis van een locatie om te helpen met het complete planningsproces. Bij aansluiting op de Axient Spectrum Manager, PSM1000 of UHF-R voert Wireless Workbench live RF-scans en analyses met gedetailleerde grafische overlays en device markers op een hoge resolutie frequentie plot.

Uitgebreide Frequentie Cöordinatie

Scangegevens, de zender database en geavanceerde compatibiliteit algoritmen kunnen worden gebruikt voor het maken en toewijzen van een lijst schone frequenties voor elk aantal kanalen in een systeem, inclusief back-up frequentie management.

Live Monitoring

Via de aangesloten hardware zijn tijdens een show real time aanpassingen te doen in de frequentie, gain, RF uitgangsvermogen en nog veel meer. Pas controles aan in een vertrouwde kanaal strip interface voor audo- en RF-meters, batterij levensduur en volume control voor elk kanaal van een draadloos systeem. Configureerbare gebruiker waarschuwingen bieden snelle respons mogelijkheden via de software om interventie problemen op te lossen bij detectie of voor resterende batterij levensduur en RF signaalsterkte.

Compatibel met Nieuwe Draadloze Systemen

De nieuwe Wireless Workbench 6 is compatibel met de netwerk functionaliteiten van nieuwe draadloze systemen van Shure zoals Axient, ULX-D maar ook met andere Shure systemen zoals PSM1000 en UHF-R.

Software Versies

Software Versies

Wireless Workbench 6.12.5 (Windows 7, 8, 10)

Besturingssyste(e)m(en):

Windows 7, 8, 10

Release Notes:

Release Date: 9/5/2018

NEW FEATURES

  • Added support for Axient® Digital with ADX Series transmitters
  • Added support for SBC220 Networked Docking Chargers

IMPROVEMENTS

  • Support added for systems in Frequency Diversity Combined mode to enforce 1 MHz frequency separation from each channel of a Frequency Diversity pair
    • This includes the G57+ band for Axient Digital A band receivers.
  • Removed TV 53 from the Japanese TV map.
  • Numerous performance enhancements for the Monitor View and Timeline, including the resolution of issues that may have caused excess memory usage or application lagging.
  • General bug fixes

KNOWN ISSUES

  • Exporting TV exclusions to Spectrum Managers when a TV Channel Width other than 6 MHz can result in improper TV range exclusions.
  • ULX-D receivers running firmware version 2.0.28 or earlier may trigger a Settings Conflict when rediscovered after updating their firmware to version 2.1 or later. There is no issue with the device – there was simply a new property added in version 2.1. To dismiss the alert, resolve the Settings Conflict by selecting the properties you wish to keep.
  • Audio Summing reported from ULX-D receivers reports an Audio Overload on all channels instead of on the specific channel(s) experiencing the overload.
  • Timeline System Events displayed when using the Axient Digital FD-Override (in FD-S, selecting to Lock to Rx 1/2/Auto Switch) do not get displayed on both FD channels.
  • Timeline System Events displayed for Active Transmitter Online for ULXD6/8 transmitters do not always include Transmitter Device ID in the event description.
  • On Macs, when users open show files and launch the Frequency Analysis dialog (by checking the checkbox and pressing “Analyze”), the Frequency Coordination tab may stop responding to keyboard inputs (for example, editing or deleting frequencies with the keyboard). To work around this issue, select another tab in the application (e.g.: Inventory or Monitor) and then reselect the Frequency Coordination tab.
  • SLX and ULX frequencies in Master List mode cannot be manually entered in the Coordination Workspace. They can, however, be coordinated and analyzed.
  • When scanning with AXT400 receivers, the Band Preset value in the Live Scan Settings dialog does not always stay in sync with the currently selected band of the receiver. The Band Preset can be manually changed to scan any supported range.
  • Alerts logged when devices first come online may list device parameters and their values as they are being discovered even though the parameter values themselves have not changed.
  • Certain bodypack portables are not compatible with SBC220 (P3RA, P9HW, and UR5), in that the charging status and other attributes cannot be remotely monitored from WWB. These bodypack portables will still be charged when using SBC220, but viewing the charge percentage or other attributes of those batteries will not be available from WWB.

NOTES

  • To operate Wireless Workbench successfully, you must run it as an administrator. (Consult your IT department if you have questions.)
  • Tags that have been added to a show file but are not assigned to any devices are not saved within the show file.
  • Opening show files created with older versions of Wireless Workbench may result in the Settings Conflicts dialog opening once the file has loaded. This is due to newly supported hardware parameters that have been introduced with updated firmware versions. To maintain all settings from the show file, select "Keep all settings from: Wireless Workbench".
  • On machines running Windows 7, Wireless Workbench will not be able to discover devices when the machine has fallen back to its 169.254.xxx.yyy fallback IP address, regardless of the IP addressing of the connected Shure devices.  To address this, perform one of the following:
    • Insert a DHCP server onto your network and set your machine and Shure devices to accept automatic IP addressing.
    • Statically assign your machine's IP address to the 169.254.xxx.yyy fallback subnet with a different IP address than the one it fell back to originally.

Wireless Workbench 6.12.5 (MAC OS X)

Besturingssyste(e)m(en):

Mac OS X 10.11-10.13

Release Notes:

Release Date: 9/5/2018

NEW FEATURES

  • Added support for Axient® Digital with ADX Series transmitters
  • Added support for SBC220 Networked Docking Chargers

IMPROVEMENTS

  • Support added for systems in Frequency Diversity Combined mode to enforce 1 MHz frequency separation from each channel of a Frequency Diversity pair
    • This includes the G57+ band for Axient Digital A band receivers.
  • Removed TV 53 from the Japanese TV map.
  • Numerous performance enhancements for the Monitor View and Timeline, including the resolution of issues that may have caused excess memory usage or application lagging.
  • General bug fixes

KNOWN ISSUES

  • Exporting TV exclusions to Spectrum Managers when a TV Channel Width other than 6 MHz can result in improper TV range exclusions.
  • ULX-D receivers running firmware version 2.0.28 or earlier may trigger a Settings Conflict when rediscovered after updating their firmware to version 2.1 or later. There is no issue with the device – there was simply a new property added in version 2.1. To dismiss the alert, resolve the Settings Conflict by selecting the properties you wish to keep.
  • Audio Summing reported from ULX-D receivers reports an Audio Overload on all channels instead of on the specific channel(s) experiencing the overload.
  • Timeline System Events displayed when using the Axient Digital FD-Override (in FD-S, selecting to Lock to Rx 1/2/Auto Switch) do not get displayed on both FD channels.
  • Timeline System Events displayed for Active Transmitter Online for ULXD6/8 transmitters do not always include Transmitter Device ID in the event description.
  • On Macs, when users open show files and launch the Frequency Analysis dialog (by checking the checkbox and pressing “Analyze”), the Frequency Coordination tab may stop responding to keyboard inputs (for example, editing or deleting frequencies with the keyboard). To work around this issue, select another tab in the application (e.g.: Inventory or Monitor) and then reselect the Frequency Coordination tab.
  • SLX and ULX frequencies in Master List mode cannot be manually entered in the Coordination Workspace. They can, however, be coordinated and analyzed.
  • When scanning with AXT400 receivers, the Band Preset value in the Live Scan Settings dialog does not always stay in sync with the currently selected band of the receiver. The Band Preset can be manually changed to scan any supported range.
  • Alerts logged when devices first come online may list device parameters and their values as they are being discovered even though the parameter values themselves have not changed.
  • Certain bodypack portables are not compatible with SBC220 (P3RA, P9HW, and UR5), in that the charging status and other attributes cannot be remotely monitored from WWB. These bodypack portables will still be charged when using SBC220, but viewing the charge percentage or other attributes of those batteries will not be available from WWB.

NOTES

  • To operate Wireless Workbench successfully, you must run it as an administrator. (Consult your IT department if you have questions.)
  • Tags that have been added to a show file but are not assigned to any devices are not saved within the show file.
  • Opening show files created with older versions of Wireless Workbench may result in the Settings Conflicts dialog opening once the file has loaded. This is due to newly supported hardware parameters that have been introduced with updated firmware versions. To maintain all settings from the show file, select "Keep all settings from: Wireless Workbench".
  • On machines running Windows 7, Wireless Workbench will not be able to discover devices when the machine has fallen back to its 169.254.xxx.yyy fallback IP address, regardless of the IP addressing of the connected Shure devices.  To address this, perform one of the following:
    • Insert a DHCP server onto your network and set your machine and Shure devices to accept automatic IP addressing.
    • Statically assign your machine's IP address to the 169.254.xxx.yyy fallback subnet with a different IP address than the one it fell back to originally.

Downloads

Downloads

Wat anderen zeggen

Wat anderen zeggen

Compatibele producten

Compatibele producten

Vergelijkbare producten

Vergelijkbare producten

Gerelateerde inhoud

Gerelateerde inhoud

U bent wellicht ook geïnteresseerd in ...

U bent wellicht ook geïnteresseerd in ...